Mitsubishi Xpander Recall Units

Mitsubishi Xpander units needs to recall its units with fuel pump factory defect. It was announce by Mitsubishi motors Philippines after several observations of the units and some other test and complains in other country.

In the Philippines there were no reports of issues however Mitsubishi motors Philippines would like to make sure that all units that have been sold are in excellent conditions.

The recall request are those units purchase from May 2018 till October 2019. To replace the fuel pumps it need to get appointment for the service centers and will be done within one to two hours.

Benefits of Installer a Car Spoiler

Installing a spoiler on a car provides a variety of benefits for owners. The main benefits, perhaps, are for better traction and to add a sporty look, but also include other advantages, such as increased fuel efficiency, added visibility, reduced car weight, and braking stability.

Benefit 1: Maintain Traction

The main benefit of installing a spoiler on a car is to help it maintain traction at very high speeds. Generally, when a car goes very fast (over 70 miles per hour), the air pressure can lift the car, which makes it difficult to maneuver the car without the danger of having it spin out of control. Rear spoilers, in particular, push the back of the car down so the tires can grip the road better and increase stability.

Benefit 2: Increase Fuel Efficiency

Front car spoilers or air dams can actually increase gas mileage in some cars. Since these types of spoilers reduce the drag (instead of increasing it) by pushing the air around the car, it does lower the amount of energy (fuel) the car needs to burn to propel itself forward.

Benefit 3: Added Visibility

Another advantage of installing a rear spoiler on a car is the added visibility. This means other drivers on the road can easily see the car and prevent rear-end collisions and other types of accidents. Certain spoilers, such as trunk cap spoilers, even have brake lights at eye-level so the driver behind can easily be alerted when the car is slowing down or braking.

Benefit 4: Reduce Weight

Believe it or not, a spoiler can reduce the weight of a vehicle. While this may seem counterintuitive, it makes sense in a way. The only thing keeping a car stable on the road is its weight. Perhaps that’s why many people have this perception that SUVs are much safer, because their heavier mass keeps them steady. However, having a spoiler means that the car manufacturer can reduce the weight of the car by using lighter materials or doing away with unnecessary weight, without worry that driving at high speeds will cause the car to become unsteady and fly off the highway.

Benefit 5: Create a Stylish Look

Most car owners install spoilers as a fashion accessory and spoilers do a pretty good job of making a car look cool. This idea first became popular in the 1970s, when Porsche introduced the 911 Turbo, which featured whale tail spoilers on the back. Today, many cars come with built-in spoilers to evoke that "sporty" look, though many aftermarket spoilers are available for a wide variety of car makes and models.

Benefit 6: Increase Braking Stability

Adding spoilers that raise the downward force on the back of the car not only increases traction, but the braking ability as well. Drivers will have an easier time braking, even at high speeds, making driving even safer.

Conclusion

A spoiler is a car accessory that changes the aerodynamics of a car. It’s usually a separate device added to the rear of a vehicle, though there are some types of spoilers that are added to the front bumper. There are many different types of spoilers today, but they can be best classified according to where they are positioned on the car. These types of spoilers include pedestal spoilers, front spoilers, lip spoilers, and wings.

Adding a spoiler to a car is not all about looks. While many people may sneer at fancy spoilers on street cars, these actually do provide other advantages. There are six different benefits to installing a spoiler on a car, including added traction, increased fuel efficiency, added visibility, reduced weight, enhanced style, and increased braking ability. With thousands of items being listed at any given time, buyers will surely find the right type of spoilers they need on eBay Motors.

Types of Spoilers

There are various types of aftermarket spoilers available today in various designs and types of materials. However, perhaps the best way to categorize spoilers is by where they will be mounted on the car, as this will also determine how they can improve a car’s performance. The chart below summarizes the common types of spoilers:

Pedestal Spoiler - A popular type of spoiler found in the rear of a car, on top of the trunk; improves stability while adding a stylish look

Front Spoiler - Added to the front of the car to lessen the drag created by rear spoilers; blocks any unstable air currents from entering the chassis; also called an air dam

Lip Spoiler - Smaller and sleeker than regular rear spoilers; usually added for aesthetics, but can be useful in reducing lift at higher speeds

Wings - A type of spoiler seen on race cars and some customized street cars; much larger than regular rear spoilers and mounted on a bracket or pedestal; generates a down force that creates a drag to stabilize the vehicle

Most car owners add spoilers to their cars to create a sporty look associated with race cars. Many types of spoilers add a sleek and stylish form to the car, but people who drive in the city or suburbs under 70 miles per hour may not see any immediate changes. However, people who do serious highway driving can benefit most from adding spoilers.

Hyundai i30 TCR Asia Series Racing with Filipino Driver Daniel Miranda

International scale TCR Asia series with Hyundai i30 in a single seater driver Daniel Miranda from Cebu. The 22 year old has confirmed joining in the TCR Asia Series with Eurasia Motorsport where he will be driving Hyundai i30.

Daniel Miranda is a successful race car driver and has many accomplishment in the motor sport. He was at first a go kart race driver and awarded last 2013 as driver of the year. He was also a Toyota Vios cup racer in the team Obengers. Last 2018 Daniel Miranda achieved a podium finish on his Asian Formula Renault debut and was crowned vice champion in Formula V1.

Together with Cebuana Lhuillier , Daniel Miranda is reunited with his AFR team to enter the Asian touring car series. Together they will compete in the full five round TCR Asia Series championship that will take them to racing circuit of Thailand, Korea and China starting on the season open on April 5th to 7th at Sepang Internation Circuit Malaysia.

As being an Only Filipino Driver in the Team Daniel Miranda mentioned that he will do his best in this race for his family and for the team, also thanking the Cebuana Lhuiller for their support.

Daniel Miranda already completed his 3 days orientation at Sepang Racing Circuit in Malaysia to familiarize himself with his new race car. He was able to consistently improve at every session, working on his driving style, adjusting to running on full racing slicks as well as adjusting himself to the hot Malaysian Weather.

The Hyundai i30 N TCR is already a race winning package out of the box and propelled Gabriele Tarquini to the World Touring Car Cup title in 2018. The Hyundai i30 TCR is powered by a 350hp 2.0Liter turbocharged 4 cylinder engine with 6 speed sequential gearbox and fitted with adjustable dampers and brembo brakes.

The Races schedules April 5 to 7 Malaysia (Sepang International Circuit), May 3 to 5 (Korea International Circuit) May 31 to June 2 China (Shanghai International Circuit) July 5 to 7 Thailand (Zhejian International Circuit).

Source: Manila Standard News

Hyundai Elantra 2019

The Hyundai Elantra 2019 reveals its new design in Australia. The Hyundai Elantra 2019 is a completed redesigned of 4 Door Sedan adding new technology and comfort. The Hyundai Elantra 2019 is the  6th Generation of its design removing some styles from old modes but adding bolder angles.

 The Hyundai Elantra enhanced its designed with new hood, headlamps limited and sports trim LED headlamps as standard. It means that if you got the lowest variants it still equipped with high end designs including the trunk lamps.

The Hyundai Elantra 2019 will have a Sport Variant a 1.6Liter Turbo GDI engine with 6 speed or 7 speed dual clutch transmission as an option having a 201 horsepower.There will also be a multi link independent rear suspension and changes to both the exterior and interior styles.

The Hyundai Elantra 2019 moves up on its standard design from previous models putting 5 inch color audio system screen with Bluetooth, A rear view camera with dynamic guidelines is also added to SEL standard model. For Safety it has forward collision avoidance assistance and lane keep assistance.

Brake System Invented by Filipino "Break Leak Saving Valve"

A Former Jeepney Driver Invented a new Layer of Protection in the Hydraulic Brake System of Vehicle to Reduce the Number of Road Accidents.

The Inventor of Leak Saving Valve for Breaking System is invented by Mr. Melchor Henosa, a device that immediately stops any leak of brake fluid enabling the driver to regain control of the vehicle  and to avoid collision and other deadly accidents.

Melchor said, that at present the Drivers are only advised to properly maintain their vehicles and avoid being reckless on the road, but even if as a normal driver there is a chance that the break fluid can leak and they lose the power to control . This is why drivers need the break leak sealing valve.

Melchor Henosa who reached second year high school developed the ide as early as 2010 while waiting for a cousin at the car park of Ninoy Aquino International Airport. Because of the long waiting time, he looked at a vehicle and thought about the need for check valve in case of fluid depletion, because he had experience of "lost brake" indidents as a driver. His imagination was triggered when he went home. A few days later at early 2 am in the morning he started illustrating a design for the brake leak sealing valve.

Melchor Henosa who used to drive a jeepney in Silang Cavite and serve as an auto mechanic at the same time, compared his invention to a fuse which protects an electrical circuit and prevents excess currents. Melchor mentions "It is like an electric fuse which prevents fire. With Break Leak Sealing Valve, we can prevent loss of brake fluid. Once you press down the break pedal, your brake system becomes functional again which is very, very powerful to control the vehicle.

The Intellectual Property Office of the Philippines approved the patent for Henosa's invention on April 8, 2013 or nearly 19 months after he submitted the application on September 16, 2011. Nobody contested his application for the territorial patent, providing that it was of unique design. No existing device anywhere in the world was designed for the same purpose.

After he obtained the patent in April 2013 he began the long process of developing and perfecting the product. He was able to produce 500 pieces initially which were used by drivers based in Antipolo, Tagaytay and Sta. Rosa. These initial products has been recalled for more development and improvement. At present Melchor says he is now ready for mass production of the brake leak sealing valve, it is ideal for all types of vehicles using hydraulic systems such as jeepyneys, elfs, delivery vans, trucks and cars. The complete packages costs 4,000 Pesos.

Melchor Henosa received the Outstanding Invention Award from the Department of Science and Technology and a Gold Medal from the World Intellectual Property Organization in 2016.

Melchor Henosa encourages other inventors to file for patent with IPO as a way of protecting their IP Right.

Source: Roderick T. Dela Cruz (Manila Standard)

Benefits of Installing a Spoiler on Your Car

Benefits of Spoiler

A spoiler is a car accessory that changes the aerodynamics of a car. It is usually a separate device added to the rear of a vehicle though there are some types of spoilers that are added to the front bumper.

Installing a spoiler in your car provides a variety of benefits for owners. The main benefits, perhaps, are for better traction and to add a sporty look, but also include other advantages, such as increased fuel efficiency, added visibility, reduced car weight, and braking stability.

MAINTAIN TRACTION
The benefit if installing a spoiler on a car is to help it maintain traction at very high speeds. Generally when a car goes very fast the air pressure can lift the car, which makes it difficult to maneuver the car without danger of having it spin out of control. Rear spoilers in particular push back of the car down so the tires can grip the road better increasing stability.

INCREASE FUEL EFFICIENCY
Front car spoilers or air dams can actually increase gas mileage in some cars. Since these types of spoilers reduce the drag by pushing the air around the car, it does lower the amount of energy of fuel the car needs to burn to propel itself forward.

ADDED VISIBILITY
Another advantage of installing a rear spoiler on a car is the added visibility. This means other drivers on the road can easily see the car and prevent rear end collision and other types of accidents. Certain spoilers such as trunk cap spoilers even have break lights at eye level so the driver behind can easily be alerted when the car is slowing down or braking.

REDUCE WEIGHT
Believe it or Not a spoiler can reduce the weight of a vehicle. The only thing keeping a car stable on the road is its weight. Perhaps that is why many people have this perception that SUVs are much safer because their heavier mass keeps them steady. However having a spoiler means that the car manufacturer can reduce the weight without worry that driving at high speeds will cause the car to become steady and fly off the highway.

CREATE A STYLISH LOOK
Most car owners install spoilers as a fashion accessory and spoilers do a pretty good job of making a car look cool. This idea first became popular in the 1970s when Porsche introduced the 911 Turbo which featured whale tail spoilers on the back. Today many car manufacturers release their models with built in spoilers to evoke that sport look though many aftermarket spoilers are available for a wide variety of car makes and models.

INCREASE BRAKING STABILITY
Adding spoiler that raise the downward force on the back of the car not only increases traction but braking ability as well. Drivers will have an easier time braking, even at high speeds making driving even safer.

TYPES OF SPOILERS

Pedestal Spoiler -  A popular type of spoiler found in the rear of a car, on top of the trunk and improves stability while adding stylish look.

Front Spoiler - Added to the front of the car to lessen the drag created by rear spoilers; blocks and unstable air currents from entering the chassis; also called an air dam.

Lip Spoiler - Smaller and sleeker than regular rear spoilers; usually added for aesthetics but can be useful in reducing lift at higher speeds.

Wings - A type of spoiler seen on race cars and some customize street cars; much larger than regular rear spoilers and mounted on a bracket or pedestals, generates a down force that creates a drag to stabilize the vehicle.

Mitsubishi Lancer Evolution History

The Mitsubishi Lancer Evolution Version V were the officially approved models for Mitsuhishi's goal to be in the World Rally Championship Group A and in order to follow the rules, the Mitsubishi Lancer Evolution is based on the same platform as the Mitsubishi Lancer but more powerful.

The Mitsubishi Lancer Evolution or Lancer Evo was born after the success of Galant VR-4 in the World Rally Championship. Mitsubishi Motors Japan would like to expand  their success into smaller sedan vehicles and chosen Mitsubishi Lancer to be customize for the purpose of World Rally. In 1990 Mitsubishi Engineers started the VR4 and later applied to Lancer and was called the Evolution.

The Lancer Evolution was introduced in 1992 to compete in the World Rally Championship carrying its 2.0L turbocharged DOHC engine and with 4 wheel Drive train from its original sister vehicle Mitsubishi Galat VR4. The competition in the World Rally Championship requires 2,500 production models and so it was made by Mitsubishi motors offering the GSR and RS, and 5,000 Mitsubishi Lancer Evolution was given away from 1992 to 1993. Mitsubishi's intention was to have a good starting point in light weight rally car category.

In 1996 till 1999 The Lancer Evolution was very successful when it comes to World Rally Championship Rallies, The Lancer Evolution was unique among its competitors in Group A car which is the slightly modified.

The Mitsubishi Evolution was originally intended only for Japanese markets but demanded to be imported in the United Kingdom, it was offered by Mitsubishi Motors  as limited type. The Mitsubishi Lancer Evolution have been produce from 1993 up to today with Evolution Versions VI, VII, VII and IX which does not need to meet World Rally Championship requirements.

The 2006 Mitsubishi Lancer Evolution includes a turbocharged 286 horseP inline four-cylinder engine and a full-time all wheel drive powertrain. Variable valve timing is an Evolution first in 2006, coming in the form of MIVEC (Mitsubishi Innovative Valve-timing-and-lift Electronic Control).

Japanese specification cars were limited by a gentleman's agreement to advertise no more than 280 PS (276 hp), a mark already reached by the time of Evolution IV; however, each generation of Evo's power has clandestinely evolved above the advertised number, with the Japan-spec Evo IX having real output of about 320 PS, and various versions available in other markets, particularly the UK, have official power outputs up to 405 bhp (302 kW). Even standard components are considered "tuned" compared to other vehicles. For instance, the flywheel on normal cars weighs about 12-15 kilograms but the Lancer flywheel weighs a mere 6 kilos for very quick engine response.

Unfortunately, the Evo has also been evolving into a heavier and heavier vehicle with each generation in face of tougher worldwide safety and emission regulations.

Source: Topspeed

Estefano Rivera Wins - Toyota Vios Cup 2018

Another Rivera - A Family Name Known as Race Champions in the Philippines. Estefano Rivera Wins the Toyota Vios Cup in Pampanga .

In this year includes participants Celebrity racers like, Sam Milby, Sofia Andres, Aubrey Miles, Troy Montero, Diego Loyzaga. The Most dominant and has future to go as champion Celebrity Racer is Dominic Ochoa. He grab the opportunity of leading the race overtaking Estefano Rivera in the last lap of the race.

Dominic Ochoa take advantage on the fading brakes of Estefano Rivera providing an opening to Dominic while tailing on Rivera.

However, in the few time to go Estefano Rivera made a drastic snatch of Victory from Dominic Ochoa on the corner making back first again in the position and finally allowing him to take the Win. Estefano Rivera's team is Obeners Racing.

The Vios Cup 2018 Championship round will be on September 22, 2018 at the Clark International Speedway Pampanga. All the Vios Cup Teams and Celebrity Races are given the chance to qualify as they reach the number in this prequalifying race, it will be expected to intensify as the race to 2018 crown is in the final stage.

Kia Rio 2019 Sedan

The popularity of Korean cars Kia is based on a combination of affordable cost, reliability and expanded to suit its category of functionality. The upgraded sedan Kia Rio 2019 varies from its original models:

• state-of-the-art body design;
• Comfortable and bigger space interior;
• Engine Fuel Consumption and Reliability.

The redesigned Kia Rio 2019 sedan of its price category is toned design based on Kia K2 models which was originally developed for the Chinese market. Despite the changes in the external design and internal equipment its characteristics not expressively changed.

In the Philippine market, the Kia Rio model 2018 which part of the latest generation is represented by the hatchback version. The Kia Rio 2019 Sedan features a stiffer new body, reinforced suspension and increased to 170 mm clearance.

Kia Rio 2019 sedan differs its prototype:

• exclusive form of radiator facing;
• a modified bumper with a large air intake;
• The original shape of the front optics and fog lamps.

Supplemented with LED driving lights and fog lights, the side cutouts also serve to cool the front brakes. The Design puts more attention to the longitudinal support located at the bottom of the body, connecting the front and rear wheel arches. Lateral glazing has got a metal fringing, side signal mirror lamps.

Firming the new Kia Rio 2019 is easily recognizable by the design of the luggage compartment hatch and the bridge connecting the tail lights. X-shaped body kit is used to accommodate exhaust pipes and wells for improved extended back lamps.

Despite of categorizing as budget car, The Kia Rio 2019 sedan High end variant is made of high-quality finishing and decorative materials, including high-quality artificial and natural leather, beautiful and wear-resistant fabrics, and polished metal.

The Kia Rio 2019 Sedan dashboard instrument panel shows compactly arranged control of on-board systems, multimedia display and air deflectors. In the center of the dashboard is conveniently locates the control for air conditioning and multimedia.

• The torpedo and tunnel separates the well for storage of small items, in the list of main and additional equipment - control levers of the gearbox and parking brake, the recesses for the glasses and a comfortable armrest.
• The Kia Rio 2019 Sedan High End variant will include the sporty style of the steering wheel with built-in buttons for controlling the multimedia device and other controls on-board systems.
• Thin knitting needles contribute to an excellent overview of the instrument panel, on which there is a place for the display of the on-board computer in addition to the tachometer and speedometer.
• Front seats are equipped electronic adjusting devices. There is a comfortable sofa on the back, which can accommodate three adult passengers for passengers conveniences.

Optional equipment includes climate control and navigation systems, as well as heated windshield, reverse mirrors.

The new model of Kia Rio 2019 sedan in top-end configuration is equipped with a full set of airbags, systems of keyless start and access to the interior, parktronics and front optics with the function of turning

Overall dimensions of the front-drive of Kia Rio 2019 with the body "sedan" are standard for its category, respectively 4400x1740x1470 mm, the length of the wheelbase is 2600 mm, the clearance height is 170 mm.

In relation to previous models, the body became a little longer and wider, and the distance between the bridges also increased by 3 cm. Reducing the space size of the trunk from 500 to 480 liters is partially or completely offset by an increase in the fuel tank from 43 to 50 liters.

The range of power units consists of two gasoline-powered drives, with a volume of 1.4 and 1.6 liters, with a power output of 100 and 123 hp respectively, operating in tandem with a 6-speed manual transmission or Automatic Transmission.

The Base Model features of the Kia Rio 2019 sedan includes:

• audio and multimedia standard set;
• Electronic button adjustment of the position of the seats and steering column;
• power windows;
• Navigation system and safe driving alarms.

The High End Kia Rio 2019 Sedan version includes additional features from base model:

• LED stuffing head optics and rear lights;
• Keyless access;
• Single-zone climate control, electronic seat adjustments;
• Full set of front and side airbags;
• reverse camera, park tronics and safety alarms.

Production and Delivery

The Kia Motors assume the base model of latest generation of Kia Rio 2019 Sedan will be delivered to European auto shows in the middle of 2018. The release date of models and its domestic assembly was postponed to a later date to complete all the scheduled performance test and test drives.

Competing Models In this category, identical price and performance for the Hyundai models Accent 2019 series, Ford Fiesta 2019, Mazda 2 2019 Sedan, Toyota Vios 2019, Mitsubishi Mirage 2019 Sedan, Honda City 2019.

Source: Kia Motors International / Kia Rio my City Auto

Toyota Vios 2019 - Starts Production at Laguna Factory

Looks like the Goal of Toyota is to Continue its lead of Passenger Cars. The New Toyota Vios 2019 started its production in Toyota Factory in Santa Rosa Laguna. Toyota Vios 2019 model was presented to the press by the Toyota Motor Philippines President and their Executives. Because the Toyota Vios captured the hearts of the Filipinos with its first model last 2003 and begun the productions of Toyota Vios 2007 model in Toyota Motors Factory in Santa Rosa Philippines.

It is expected that the Toyota Vios 2019 will succeed more than the previous models who has the largest volume of model production in the Philippines sold over 36,000 units last year. The Increased of local vehicle production under the Comprehensive Automotive Resurgence Strategy or CARS Program is one of the most significant ways that Toyota is helping to push this plan,mentioned by Toyota Motor Philippines Executives.

Toyota Motors Philippines are optimistic to achieve 200,000 units in 6 years."

The Overall Design of Toyota Vios 2019 is the biggest Improvement. Based on the brochure specification, the all-new Vios will have 6 distinct variants from 1.3L Base model with the 98 PS, 123 Nm 1.3L dual VVTi engine and a 5speed manual, the power train specs are the same with the Toyota Vios 2018 1.3 J version. Comparing to the previous models the J variants have actually improved in terms of specifications unlike its usual features from the current Vios both now get a new audio unit that has Bluetooth as standard.

The Toyota Vios 2019 1.3 E variant comes with a few more add on than the early versions such as 15-inch alloy wheels with 2 more speakers with better nicer trim pieces, including its 7-inch touchscreen display audio unit with iOS and Android compatibility, as well as Bluetooth. The 1.3 E can have either the 5-speed manual or the CVT.

The Toyota Vios 2019 1.5G variant  comes with the 1.5L dual VVTi inline 4 Cylinder motor that makes 106 PS and 140 Nm of torque. Like before the Toyota Vios 2019 G variant will also come with disc brakes on all wheels along with projector halogen headlamps, 6-speakers, daytime running led, an automatic climate control system, and 16 inch alloy wheels.

Like the Toyota Vios 2019 E variant, the Toyota Vios 2019 1.5 G models can have either a 5 speed manual or a CVT. The Toyota Vios 2019 G will have an Eco drive mode as well as a Sport drive mode, presumably to adjust the settings of the CVT, depending on how you want to drive.

There are two new added variants with regards to the specification sheet from Toyota Motor Philippines, the first of which is the addition of two new variants: the Toyota Vios 2019 1.3 E Prime, and the Toyota Vios 2019 1.5 G Prime. Both these new variants are sport dressed up having body add ons such as front, rear, and side skirts, as well as a rear spoiler and piano black mirrors. The Toyota Vios 2019 G Prime will only be available as a CVT version.

Sources: Toyota Motor Philippines and Auto Industria.com